In general, within this Final Rule under OSHA. Further, the Final Rule went into effect on January 17, 2017. You may recall that significant changes to fall protection requirements took place with OSHA’s 2016 Final Rule. What are OSHA guidelines to keep in mind when considering walking working safety in regard to platforms? We’ll begin with some general OSHA standards. A safe work platform is necessary, particularly when working at heights. Whether mobile, fixed, permanently installed, or reconfigured to adjust to different vertical height or expanded for access to elevated work areas, how does OSHA define a work platform? What is a Work Platform?Īccording to OSHA: “A platform means a walking-working surface that is elevated above the surrounding area.” As you can see, a work platform is any elevated platform used for walking or working.Īpplications include platforms for industrial assembly lines, maintenance and service, mezzanines, catwalks, walkways, crossovers, crossover ladders, access platforms, and more. This post discusses some OSHA platform requirements in general industry. OSHA compliance in safety regulations for work platforms is one step toward protecting your workers from falls and fall hazards. ![]() Because work platforms typically are positioned above the ground level, they pose risk for worker injury or falls from vertical heights. Platforms are commonly used in warehouses and other industrial areas for safe access, repair, and building maintenance. (3) For structural steel railings: posts, top rails, and intermediate rails shall be at least 2-inch by 2-inch (5 cm × 10 cm) by 3⁄8-inch (1.1 cm) angles, with posts spaced not more than 8 feet (2.4 m) apart on centers.Work platforms come in a variety of shapes, sizes, and configurations depending on the use and needs in your working environment. ![]() (2) For pipe railings: posts, top rails, and intermediate railings shall be at least one and one-half inches nominal diameter (schedule 40 pipe) with posts spaced not more than 8 feet (2.4 m) apart on centers. All lumber dimensions are nominal sizes as provided by the American Softwood Lumber Standards, dated January 1970. (1) For wood railings: Wood components shall be minimum 1500 lb-ft/in2 fiber (stress grade) construction grade lumber the posts shall be at least 2-inch by 4-inch (5 cm × 10 cm) lumber spaced not more than 8 feet (2.4 m) apart on centers the top rail shall be at least 2-inch by 4-inch (5 cm × 10 cm) lumber, the intermediate rail shall be at least 1-inch by 6-inch (2.5 cm × 15 cm) lumber. Components for which no specific guidelines are given in this appendix (e.g., joints, base connections, components made with other materials, and components with other dimensions) must also be designed and constructed in such a way that the completed system meets the requirements of § 1926.502. However, the guidelines do not provide all the information necessary to build a complete system, and the employer is still responsible for designing and assembling these components in such a way that the completed system will meet the requirements of § 1926.502(b) (3), (4), and (5). An employer may use these guidelines as a starting point for designing guardrail systems. This appendix serves as a non-mandatory guideline to assist employers in complying with these requirements. The standard requires guardrail systems and components to be designed and built to meet the requirements of § 1926.502 (b) (3), (4), and (5). Non-Mandatory Guidelines for Complying with § 1926.502(b) Appendix B to Subpart M of Part 1926 - Guardrail Systems
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |